➘ If the water is drained into a washbasin or other free discharge point, the free end of the drain hose must be reinforced at the bend using the bracket supplied for the purpose. ➘ In order to prevent the siphon from filling with air and causing water leaks, the connection of the drain hose to the waste water system should not be sealed. ➘ If the washing machine drains directly into the waste water system, the free end of the machine drain hose must be inserted into a pipe of diameter not less than 40 mm. ➘ The water drain pipe outlet must be located at a height between 60 cm and 90 cm [fig. ➘ During washing, the water feed valve must be fully open. ➘ Insert the washer in the other end of the feed hose and screw it onto the washing machine [fig. ➘ Insert the washer with the filter (supplied with the washing machine) between the valve and the feed hose, then tighten the connection by hand [fig. ➘ The water feed pipe must be connected to the cold water system through a 3/4” screwed connection.
This will clean the pipes of any dirt such as sand or rust (this operation is above all necessary when connecting the washing machine to a new connection or one that has been inactive for a long period of time).
ARDO A 500 USER MANUAL PDF
Tutorial Adobe Premiere Pro Bahasa Indonesia Pdf on this page. Ardo A400 A600 owners manual user guide download pdf free.Ĭonnecting to the water supply ➘ The mains water pressure must be between 0.05 - 1.00 MPa (0.5 - 10 bar.) ➘ Before making the connection, open the tap or valve to allow a certain amount of water to flow. Ardo A400 A600 owners manual user guide download pdf free.
ARDO A 500 USER MANUAL MANUALS
We provide free Ardo user guides and Ardo Washing machine owner manuals in PDF format page 3. It's a big list of Ardo Washing machine user manuals.
ARDO A 500 USER MANUAL INSTALL
It is advisable not to install the machine in a room where the temperature may fall to below 0 o C. If the machine is installed on a carpeted floor, make sure that air is free to circulate between the machine and the floor. If the machine is not levelled properly, it will become unstable and noisy during operation and may cause damage. Make sure that the lock-nuts on the adjustable feet are properly tightened. Care must be taken when selecting the installation position and when levelling the machine. 60 CM MAX.90 CM Installing and levelling the machine After having chosen the most suitable position, level the washing machine using the adjustable feet [Fig.
0 kommentar(er)
